Company Profile | Product | DM Download | Inquiry | Contact Us | Home | 中文

HC-207A Ionization Smoke & Heat Detector

Characteristics 

1.Has monitoring function.  The LED flashes once
   every 4 ~ 6 seconds.

2.There are two LEDs which can turn 360o and watch
   the situation of the detector at any angle.


3.It provides the wiring (-R) function of entrance LED.

4.The use of common base is advantageous to the
   exchange of detector.

5.Fixed Temperature On 60° C
Functioning way

The detector has the functions of both smoke detector and temperature detector.  As there is smoke getting in the detector, the detector functions and sends out alarm.  Meanwhile, it can also be a heat barrier.  As the temperature rises and exceed the preset temperature standard, the detector will also function and send out alarm.  The detector has two probing ways.  It can probe the smoke as well as the change of temperature.  It strengthens the probing functions of the detector.

Specifications

Model No

HC-207A
Ionization Smoke & Heat Detector

Overall structure

Adopted voltage

DC-12V

Mainframe

Fire-resisting ABS resin material

Monitoring electric current

70μA

Joint terminal

Copper rod (zinc-plated)
Functioning electric current 43mA

Base

Fire-resisting ABS resin material.
Copper rod (zinc-plated)

Suitable temperature -15~50°C
Suitable humidity 0~95% RH Color

Ivory

Size 103mm x 47mm Notes

Prohibit from being installed at the places with large volume of smoke and steam lingering, and the inlet and outlet of cold and warm air.

Weight 140g
Provide the outside with the maximum value of signal input joint volume DC30V 1A

General wiring drawing

The red wire is the power source (DC-12V)

The black wire is the signal source.

For point 3 and point 4, the NO type appears to be open all the time, and the NC type appears to be close all the time.

 

COMMON BASE | HC-306B | HC-202A | HC-601 | HC-307A | HC-207A | HC-407B | HC-206B | HC-406 | HC-407A